Thermal Stresses on a Reginal Cooling Plate
| dc.contributor.author | Koç, İbrahim | |
| dc.date.accessioned | 2018-12-11T14:27:15Z | |
| dc.date.available | 2018-12-11T14:27:15Z | |
| dc.date.issued | 2017-09-26 | |
| dc.description | DOI: 10.19072/ijet.306402 | en_US |
| dc.description.abstract | In this study, stresses and strains that occur on the surface of material are investigated for a flat plate that is made cooling as numerically and analytically. The cooling blowing ratios applied to the surface vary between 0.5 and 1.75. The cooling injection angle is 30 degrees with the horizontal. Plexiglas plate were used in experiments which done for analytical solution and numerical modelling studies. Air was injected to cooling zone at 57 oC and 77 oC. The results show that the cooling surface size varies with the blow ratio. In addition, the sizes of thermal stresses and displacements of surface set out that they are indicators of cooling. | en_US |
| dc.identifier.issn | 2149-0104 | |
| dc.identifier.issn | 2149-5262 | |
| dc.identifier.uri | https://hdl.handle.net/11363/542 | |
| dc.language.iso | en | en_US |
| dc.publisher | İstanbul Gelişim Üniversitesi Yayınları / Istanbul Gelisim University Press | en_US |
| dc.relation.publicationcategory | Makale - Ulusal Hakemli Dergi - Kurum Yayını | en_US |
| dc.rights | info:eu-repo/semantics/openAccess | en_US |
| dc.subject | Research Subject Categories::TECHNOLOGY | en_US |
| dc.title | Thermal Stresses on a Reginal Cooling Plate | en_US |
| dc.type | Article | en_US |
