Thermal Stresses on a Reginal Cooling Plate
Yükleniyor...
Tarih
2017-09-26
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
İstanbul Gelişim Üniversitesi Yayınları / Istanbul Gelisim University Press
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
In this study, stresses and strains that occur on the surface of material are investigated for a flat plate that is made cooling as numerically and analytically. The cooling blowing ratios applied to the surface vary between 0.5 and 1.75. The cooling injection angle is 30 degrees with the horizontal. Plexiglas plate were used in experiments which done for analytical solution and numerical modelling studies. Air was injected to cooling zone at 57 oC and 77 oC. The results show that the cooling surface size varies with the blow ratio. In addition, the sizes of thermal stresses and displacements of surface set out that they are indicators of cooling.
Açıklama
DOI: 10.19072/ijet.306402
Anahtar Kelimeler
Research Subject Categories::TECHNOLOGY
