Photovoltaic maximum power point tracking under fast varying of solar radiation
Yükleniyor...
Dosyalar
Tarih
2016
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Sci Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Perturb and Observe (P&O) and Incremental Conductance (INC) are widely used as Maximum Power Point Tracking (MPPT) techniques in Photovoltaic (PV) systems. But, they fail under rapidly varying of sunlight levels. This paper proposes a new MPPT technique, which can make a distinction between perturbation in the reference voltage and sudden-changing of sunlight and thus optimize the PV system efficiency. This method consists on a modified INC algorithm, which is used to fine-tune the duty cycle of the DC/DC converter in order to avoid divergences of the maximum power point (MPP) when using basic INC under fast varying of luminosity levels. The proposed PV-MPPT system, which is composed by a step-up converter as the interface to feed the load, is tested by simulation within the Matlab/Simulink software by taking into account the luminosity, the temperature-and the load variation. The simulation results are satisfactory and demonstrate that the improved INC technique can track the PV maximum power at diverse operating conditions with the most excellent performance, the energy conversion efficiency is increased by approximately 5%. (C) 2016 Elsevier Ltd. All rights reserved.
Açıklama
Anahtar Kelimeler
Photovoltaic system, Incremental Conductance, Maximum power point tracker, Step-up converter, Modeling, Simulation
Kaynak
Applied Energy
WoS Q Değeri
Q1
Scopus Q Değeri
Cilt
179
